الصف الثانى الاعدادى(Great Pyramid of Giza)

the Great Pyramid of Giza (also called the Pyramid of Khufu and Pyramid of Cheops) is the oldest and largest of the three pyramids in the Giza Necropolis bordering what is now Cairo, Egypt, and is the only one of the Seven Wonders of the Ancient World that survives substantially intact. It is believed the pyramid was built as a tomb for Fourth dynasty Egyptian King Khufu (Cheops in Greek) and constructed over a 20 year period concluding around 2560 BC. The Great Pyramid was the tallest man-made structure
in the world for over 3,800 years. Originally the Great Pyramid was
covered by casing stones that formed a smooth outer surface, and what
is seen today is the underlying core structure. Some of the casing
stones that once covered the structure can still be seen around the
base. There have been varying scientific and alternative theories
regarding the Great Pyramid's construction techniques. Most accepted
construction theories are based on the idea that it was built by moving
huge stones from a quarry and dragging and lifting them into place.
There are three known chambers inside the Great Pyramid. The lowest
chamber is cut into the bedrock upon which the pyramid was built and
was unfinished. The so-called^[1]
Queen's Chamber and King's Chamber are higher up within the pyramid
structure. The Great Pyramid of Giza is the main part of a complex
setting of buildings that included two mortuary temples
in honor of Khufu (one close to the pyramid and one near the Nile),
three smaller pyramids for Khufu's wives, an even smaller "satellite"
pyramid, a raised causeway connecting the two temples, and small mastaba tombs surrounding the pyramid for nobles.

//

Building the pyramid


It is believed the pyramid was built as a tomb for Fourth dynasty Egyptian pharaoh Khufu and constructed over a 14^[2] to 20 year period concluding around 2560 BC.^[3] Khufu's vizier, Hemon, or Hemiunu, is believed by some to be the architect of the Great Pyramid.^[4] It is thought that, at construction, the Great Pyramid was originally 280 Egyptian cubits tall, 146.6 meters, (480.97 feet, or about 40 stories) but with erosion and the loss of its pyramidion, its current height is 138.8 m (455 feet). Each base side was 440 royal cubits, 230.5 meters in length, (756.2 feet). A royal cubit measures 0.524 meters.^[5]
The total mass of the pyramid is estimated at 5.9 million tonnes. The
volume, including an internal hillock, is believed to be roughly
2,500,000 cubic meters.^[6]
Based on these estimates, building this in 20 years would involve
installing approximately 800 tonnes of stone every day. The first
precision measurements of the pyramid were done by Egyptologist Sir Flinders Petrie in 1880–82 and published as The Pyramids and Temples of Gizeh.^[7]
Almost all reports are based on his measurements. Many of the casing
stones and interior chamber blocks of the great pyramid were fit
together with extremely high precision. Based on measurements taken on
the north eastern casing stones, the mean opening of the joints are
only 0.5 millimeters wide (1/50th of an inch).^[8]

Great Pyramid of Giza from a 19th century stereopticon card photo





The pyramid remained the tallest man-made structure in the world for over 3,800 years,^[9] unsurpassed until the 160 meter tall spire of Lincoln Cathedral
was completed c. 1300. The accuracy of the pyramid's workmanship is
such that the four sides of the base have a mean error of only
58 millimeter in length ^[10]
The base is horizontal and flat to within 15 mm. The sides of the
square base are closely aligned to the four cardinal compass points
(within 4 minutes of arc)^[11] based on true north, not magnetic north^[12], and the finished base was squared to a mean corner error of only 12 seconds of arc^[13].
The completed design dimensions, as suggested by Petrie's survey and
later studies, are estimated to have originally been 280 cubits in
height by 440 cubits in length at each of the four sides of its base.
These proportions equate to π/2
to an accuracy of better than 0.05% (corresponding to the approximation
of π as 22/7). Some Egyptologists consider this to have been the result
of deliberate design proportion^[14].
Verner wrote, "We can conclude that although the ancient Egyptians
could not precisely define the value of π, in practise they used it".^[15]
Petrie, author of ‘The Pyramids and Temples of Gizeh', who was the
first accurate surveyor of Giza and the excavator and surveyor of the
Pyramid of Meidum, concluded: "but these relations of areas and of
circular ratio are so systematic that we should grant that they were in
the builders design".^[16]
Earlier in the chapter he wrote more specifically, that: “We conclude
therefore that the approximation of 7 to 22 as the ratio of diameter to
circumference was recognised”.^[17]
These proportions equated to the four outer faces sloping by
approximately 51.842º or 51º 50' 35", which would have been understood
and expressed by the Ancient Egyptians as a seked slope of 5 1/2 palms ^[18].
Materials


See also: Calculating the weight of megaliths
The Great Pyramid consists of more than 2.3 million limestone
blocks. The Egyptians obtained the majority of the limestone blocks
from a nearby quarry. The Tufa limestone used for the casing was
quarried accross the river. The largest granite stones in the pyramid,
found in the "King's" chamber, weigh 25 to 80 tonnes and were
transported more than 500 miles away from Aswan. Traditionally, ancient
Egyptians cut stone blocks by hammering wedges into the stone which
were then soaked with water. The wedges expanded, causing the rock to
crack. Once they were cut, they were carried by boat either up or down
the Nile River to the pyramid. ^[19]
Casing stones



casing stone





At completion, the Great Pyramid was surfaced by white 'casing
stones' – slant-faced, but flat-topped, blocks of highly polished white
limestone. These were carefully cut to what is approximately a face slope with a seked
of 5 1/2 palms to give the required overall dimensions. Visibly, all
that remains is the underlying step-pyramid core structure seen today.
In AD 1301, a massive earthquake loosened many of the outer casing
stones, which were then carted away by Bahri Sultan An-Nasir Nasir-ad-Din al-Hasan in 1356 in order to build mosques and fortresses in nearby Cairo.
The stones can still be seen as parts of these structures to this day.
Later explorers reported massive piles of rubble at the base of the
pyramids left over from the continuing collapse of the casing stones,
which were subsequently cleared away during continuing excavations of
the site. Nevertheless, many of the casing stones can be seen to this
day in situ around the base of the Great Pyramid, and display the same
workmanship and precision as has been reported for centuries. Petrie
also found a different orientation in the core and in the casing
measuring 193 centimeters ± 25 centimeters. He suggested a
redetermination of north was made after the construction of the core,
but a mistake was made, and the casing was built with a different
orientation.^[20]
Petrie related the precision of the casing stones as to being "equal to
opticians' work of the present day, but on a scale of acres." and "to
place such stones in exact contact would be careful work; but to do so
with cement in the joints seems almost impossible."^[21]
Construction theories

Main article: Egyptian pyramid construction techniques

Many alternative, often contradictory, theories have been proposed regarding the Pyramid's construction techniques.^[22] Not all even agree that the blocks were quarried, they might conceivably have been cast^{[citation needed]}.
However, most accept it was built by moving huge stones from a quarry,
being only unable to agree whether they were dragged, lifted or even
rolled into place. The Greeks believed that slave labour
was used but modern Egyptologists accept that it was built by many tens
of thousands of skilled workers. They camped near the pyramids and
worked for a salary or as a form of paying taxes until the construction
was completed.^{[citation needed]} Their cemeteries were discovered in 1990 by archaeologists Zahi Hawass and Mark Lehner. Verner posited that the labor was organized into a hierarchy, consisting of two gangs of 100,000 men, divided into five zaa or phyle of 20,000 men each, which may have been further divided according to the skills of the workers.^[23]
One of the mysteries of the pyramid's construction is how they
planned its construction. John Romer suggests that they used the same
method that had been used for earlier and later constructions, laying
out parts of the plan on the ground at a 1 to 1 scale. He writes that
"such a working diagram would also serve to generate the architecture
of the pyramid with a precision unmatched by any other means." He
devotes a chapter of his book to the physical evidence that there was
such a plan.^[24]
Interior



Diagram of the interior structures of the great pyramid. The inner line
indicates the pyramid's present profile, the outer line indicates the
original profile.





The Great Pyramid is the only pyramid known to contain both
ascending and descending passages. There are three known chambers
inside the Great Pyramid. These are arranged centrally, on the vertical
axis of the pyramid. From the entrance, an 18 meter corridor leads down
and splits in two directions. One way leads to the lowest and
unfinished chamber. This chamber is cut into the bedrock upon which the
pyramid was built. It is the largest of the three, but totally
unfinished, only rough-cut into the rock. The other passage leads to
the Grand Gallery (49 m x 3 m x 11 m), where it splits again. One
tunnel leads to the Queen's Chamber, a misnomer, while the other winds to intersect with the descending corridor. The Grand Gallery itself features a corbel
haloed design and several cut "sockets" spaced at regular intervals
along the length of each side of its raised base with a "trench"
running along its center length at floor level. What purpose these
sockets served is unknown. An antechamber leads from the Grand Gallery
to the King's Chamber.^[3]
Entrance


Today, tourists enter the Great Pyramid via a forced tunnel dug by
the Caliph Al-Ma'mum and his men around 820 AD. The tunnel continues
for approximately 30 meters and eventually meets up with the Descending
Passage which at the time was found to have been blocked by a series of
massive granite plugs. Unable to remove the blocks, the workmen
tunneled around the plugs discovering the Ascending Passage which leads
to the Grand Gallery and interior chambers only to find them empty. The
original entrance, which was apparently unknown at the time, can be
seen today several meters directly above the forced entry and would
have also been blocked by the granite plugs.
King's Chamber


At the end of the lengthy series of entrance ways leading into the
interior is the structure's main chamber, the King's Chamber. This
granite room was originally 10 × 20 × 11.4 cubits, or about 5.235 m ×
10.47 m × 5.974 m^[25][26],
comprising a double 10 × 10 cubit square floor, and a height equal to
half the double square's diagonal. Some believed that the height was
consistent with the geometric methods for determining the Golden Ratio
φ (phi) as the height is approximately phi times the width minus ½,
while phi can be derived from other dimensions of the pyramid^[27],
but evidence from Petrie’s surveys and later conclusions drawn by
others shows that it was in fact the circular proportions that were
deliberately incorporated into the internal and external designs of the
Great Pyramid by its architects and builders, for symbolic reasons^[28].
The so called golden ratio phi simply exists in the proportions of the
architecture as an inadvertent by-product of the inclusion of the
circular proportions. The reason for the inadvertent inclusion is that
phi, the golden ratio, has a naturally occurring mathematical relation
to the circular ratio pi that is unrelated to the architecture or
geometry, and which was unknown to the pyramids builders. Petrie
confirmed that the King’s Chamber was a triumph of Egyptian geometry,
the ratio of its length to the circuit of the side wall being the same
as the ratio of 1 to pi, and that the exterior of the pyramid had been
built to the same proportions^[28][29][30]
The sarcophagus of the King's Chamber was hollowed out of a single piece of Red Aswan granite
and has been found to be too large to fit through the passageway
leading to the chamber. Whether the sarcophagus was ever intended to
house a body is unknown. It is too short to accommodate a medium height
individual without the bending of the knees, a technique not practiced
in Egyptian burial, and no lid has ever been found. The King's Chamber
contains two small shafts that ascend out of the pyramid. Despite being
originally discovered closed off at both ends, these shafts were once
thought by Egyptologists to have been used as "ventilation shafts", but
this idea was eventually abandoned, leaving them to conclude they were
instead used for ceremonial purposes. It is now thought that they were
to allow the Pharaoh's spirit to rise up and out to heaven.^[31]
The King's Chamber is lined with red granite brought from Aswan
935 km (580 miles) to the south. There are 5 relieving chambers above
the kings chamber. The first one is reached through a breach in the
wall at the upper end of the Grand Gallery, this was named the Davidson
chamber. Howard Vyse suspected there was another chamber above this
when he found that he was able to thrust a long reed through a crack in
the ceiling. He blasted through to find 4 more relieving chambers.
These chambers were named the Wellington, Nelson, Lady Arbuthnot and
Cambell's chambers. The kings chamber and the first 4 relieving
chambers have roofs made out of granite. Each roof includes 8 or 9
granite slabs weighing 25 to 80 tonnes each. Cambell's chamber has a
pented roof made of large limestone slabs.^[32][33] Egyptologists believe they were transported on barges down the Nile river.^[34]
Queen's Chamber


The Queen's Chamber is the middle and the smallest, measuring
approximately 5.74 by 5.23 meters, and 4.57 meters in height. The
chamber is lined with fine limestone blocks and the pented roof is made
of large limestone slabs.^[35] Its eastern wall has a large angular doorway or niche. Egyptologist Mark Lehner believes that the Queen's chamber was intended as a serdab,
a structure found in several other Egyptian pyramids, and that the
niche would have contained a statue of the interred. The Ancient
Egyptians believed that the statue would serve as a "back up" vessel
for the Ka of the Pharaoh, should the original mummified body be destroyed. The true purpose of the chamber, however, remains uncertain.^[31]
The Queens Chamber has a pair of shafts similar to those in the King's
Chamber, which were explored using a robot, Upuaut 2, created by the
German engineer Rudolf Gantenbrink. In 1992, Upuaut 2 discovered that
these shafts were blocked by limestone "doors" with two eroded copper
handles. The National Geographic Society filmed the drilling of a small hole in the southern door, only to find another larger door behind it.^[36] The northern passage, which was harder to navigate due to twists and turns, was also found to be blocked by a door.^[37]
Unfinished chamber


The "unfinished chamber" lies 27.5 meters below ground level and is
rough-hewn, lacking the precision of the other chambers. Egyptologists
suggest the chamber was intended to be the original burial chamber, but
that King Khufu later changed his mind and wanted it to be higher up in
the pyramid.^[38] Egyptologist Bob Brier
believes it was an insurance policy in case Khufu died early. When he
was still alive and healthy after about 5 years of construction, the
second (Queen's) chamber was begun. Sometime around the fifteenth year
this chamber was also abandoned unfinished and the last or King's
Chamber was built high up in the center of the pyramid.^[39]
Pyramid complex



Map of Giza pyramid complex




Main article: Giza pyramid complex

The Great Pyramid of Giza is the main part of a complex setting of buildings that included two mortuary temples
in honor of Khufu (one close to the pyramid and one near the Nile),
three smaller pyramids for Khufu's wives, an even smaller "satellite"
pyramid, a raised causeway connecting the two temples, and small mastaba tombs surrounding the pyramid for nobles. One of the small pyramids contains the tomb of queen Hetepheres (discovered in 1925), sister and wife of Sneferu
and the mother of Khufu. There was a town for the workers of Giza,
which included a cemetery, bakeries, a beer factory and a copper
smelting complex. A few hundred meters south-west of the Great Pyramid
lies the slightly smaller Pyramid of Khafre, one of Khufu's successors who is also commonly considered the builder of the Great Sphinx, and a few hundred meters further south-west is the Pyramid of Menkaure,
Khafre's successor, which is about half as tall. In May 1954, 41
blocking stones were uncovered close to the south side of the Great
Pyramid. They covered a 30.8 meter long rock-cut pit that contained the
remains of a 43 meter long ship of cedar wood. In antiquity, it had
been dismantled into 650 parts comprising 1224 pieces. This funeral
boat of Khufu has been reconstructed and is now housed in a museum on
the site of its discovery. A second boat pit was later discovered
nearby.^[40]
Thieves, tourists and excavators


Although succeeding pyramids were smaller, pyramid building
continued until the end of the Middle Kingdom. However, as authors
Briar and Hobbs claim, "all the pyramids were robbed" by the New
Kingdom, when the construction of royal tombs in a desert valley, now
known as the Valley of the Kings, began.^[41][42]
Joyce Tyldesley states that the Great Pyramid itself "is known to have
been opened and emptied by the Middle Kingdom", before the Arab caliph
Abdullah Al Mamun entered the pyramid around AD 820.^[43]


أعداد الاستاذ:

عبد العزيز محمد عبد العزيز حسن